Welcome to the Kids' Library!

Aerodynamic design via control theory

Jameson, Antony, 1934-
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1988] 1988

Applications of fuzzy theories to multi-objective system optimization

Rao, S. S.
Moffett Field, Calif. : National Aeronautics and Space Administration, Ames Research Center ; [Springfield, Va. : For sale by the National Technical Information Service, 1991] 1991

Army-NASA Aircrew/Aircraft Integration Program (A3I) software detailed design document phase III

Moffett Field, Calif. : National Aeronautics and Space Administration, Ames Research Center, [1990] 1990

Automated software development workstation phase I, final report

Los Angeles, CA : Inference Corporation ; [Houston, TX] : NASA Johnson Space Center, [1986] 1986

A beginner's guide to 3D printing : 14 simple toy designs to get you started

Rigsby, Mike, 1950- author.
Chicago, Illinois : Chicago Review Press, [2014] 2014

BladeCAD: an interactive geometric design tool for turbomachinery blades

Miller, Perry L., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, July 1996. 1996-

Burner liner thermal/structural load modeling

Maffeo, R.
Cincinnati, OH : General Electric Co., Aircraft Engine Business Group, [1984] 1984

Calibration, quality assurance, and maintenance program for dosimetry equipment and selected radiati

Myska, James C.
Bethesda, Md. : Armed Forces Radiobiology Research Institute, [1996] 1996

Cascade optimization strategy for aircraft and air-breathing propulsion system concepts

Pamaik, Surya N., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, July 1996. 1996-

A computer module used to calculate the horizontal control surface size of a conceputal aircraft des

Sandlin, Doral R. (Doral Randolph), 1930-
San Luis Obispo, Calif. : California Polytechnic State University, Aeronautical Engineering Dept. ; [Washington, D.C.] : National Aeronautics and Space Administration ; [Springfield, Va. : National Technical Information Service, distributor, 1990] 1990

Computerized design and analysis of face-milled, uniform tooth height, spiral bevel gear drives

Litvin, F. L. (Faydor L.), author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center : U.S. Army Research Laboratory, October 1996. 1996-

Computerized design and generation of gear drives with a localized bearing contact and a low level o

Litvin, F. L. (Faydor L.), author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center ; Adelphi, Maryland : U.S. Army Research Laboratory, May 1996. 1996-

Conceptual design optimization study

Hollowell, S. J.
[Washington, D.C.] : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990. 1990

Creative evolutionary systems

San Francisco, CA. : Morgan Kaufmann ; San Diego, CA : Academic Press, ©2002. 2002

Curvature continuity of cubic Bezier curves in the solid modeling aerospace research tools design so

Roach, Robert L.
Hampton, VA : NASA Langley Research Center, [1990] 1990

Curves and surfaces for CAGD : a practical guide

Farin, Gerald E.
San Francisco, CA : Morgan Kaufmann ; London : Academic Press, ©2002. 2002

Design theory and methods using CAD/CAE

Chang, Kuang-Hua, 1960- author.
Amsterdam : Academic Press, 2014. 2014

Display system software for the integration of an ADAGE 3000 programmable display generator into the

Montoya, R. J.
Research Triangle Park, N.C. : Research Triangle Institute ; Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1986] 1986

E-Design : computer-aided engineering design.

Chang, Kuang-Hua, 1960- author.
London, UK : Academic Press, 2015. 2015

Effects of planetary gear ratio on mean service life

Savage, M., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, July 1996. 1996-

Electronic design automation : synthesis, verification, and test

Burlington, MA : Morgan Kaufmann Publishers/Elsevier, 2009. 2009

Engineering analysis with SOLIDWORKS simulation 2021

Kurowski. Paul M., author.
Mission, KS: SDC Publications, [2021] 2021

Engineering drawing practices volume I of II : aerospace and ground support equipment

Schwindt, Paul, author.
Kennedy Space Center, FL : National Aeronautics and Space Administration, Kennedy Space Center, May 2015. 2015-

Engineering specification and system design for CAD/CAM of custom shoes project ANG-1-875 : phase V,

Bao, Han P.
[Columbia, Mo.] : University of Missouri--Columbia, College of Engineering ; [Washington, D.C. : National Aeronautics and Space Administration, 1989] 1989

Engineering specification and system design for CAD/CAM of custom shoes UMC project effort : status

Bao, Han P.
Hampton, Va. : National Aeronautics & Space Administration, Langley Research Center, [1990] 1990

Extension of a noninteractive reliability model for ceramic matrix composites

Duffy, Stephen F.
[Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center ; [Springfield, Va. : National Technical Information Service, distributor, 1990] 1990

Feasibility study for a microwave-powered ozone sniffer aircraft.

[Washington, D.C. : National Aeronautics and Space Administration, 1990] 1990

A general-purpose optimization engine for multi-disciplinary design applications

Patnaik, Surya N., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, August 1996. 1996-

Geometry of design : a workbook

Kim, Nam-ho, author.
Cambridge, England : Woodhead Publishing, 2014. 2014

Handbook of computer aided geometric design

Amsterdam ; Boston, Mass. : Elsevier, 2002. 2002

Introduction to finite element analysis using Solidworks Simulation 2015

Shih, Randy H., author.
Mission, KS : SDC Publications, [2015] 2015

An introduction to NURBS : with historical perspective

Rogers, David F., 1937-
San Francisco : Morgan Kaufmann Publishers, ©2001. 2001

Investigation into the development of computer aided design software for space based sensors final r

Pender, C. W.
Manchester, TN : Tennessee Space Laboratories, Inc. ; Greenbelt, MD : NASA/Goddard Space Flight Center, [1987] 1987

Micromechanics analysis code (MAC) user guide: version 2.0

Wilt, T. E., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, August 1996. 1996-

Modern graphics communication

Giesecke, Frederick E. (Frederick Ernest), 1869-1953 author.
Upper Saddle River, N.J. : Prentice Hall, [2010?] 2010

N+2 supersonic concept development and systems integration

Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [2010] 2010

NASA Workshop on Computational Structural Mechanics 1987 proceedings of a workshop

NASA Workshop on Computational Structural Mechanics (1987 : Langley Research Center)
[Washington, D.C.] : National Aeronautics and Space Administration ; [Springfield, Va. : for sale by the National Technical Information Service, 1989] 1989

Numerical computation of the radar cross section of the ZSU-23-4 / Ronald Chase, H. Bruce Wallace, T

Chase, Ronald, author.
Adelphi, MD : Army Research Laboratory, April 1999. 1999-

On processing development for fabrication of fiber reinforced composite, II

Hou, T. H.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1989] 1989

Open-source PSCAD grid-following and grid-forming inverters and a benchmark for zero-inertia power s

Kenyon, Rick Wallace, author.
Golden, CO : National Renewable Energy Laboratory, April 2021. 2021-

An optimization-based integrated controls-structures design methodology for flexible space structure

Maghami, Peiman G.
[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Progam, 1993. 1993

Parametric modeling with Solidworks 2020 : Covers material found on the CSWA exam

Shih, Randy H., author.
Mission, KS : SDC Publications, ©2020. 2020

Principles and practice : an integrated approach to engineering graphics and AutoCAD 2020

Shih, Randy H., author.
Mission : SDC Publications, 2019. 2019

Principles and practice : an integrated approach to engineering graphics and AutoCAD 2021

Shih, Randy H., author.
Mission, KS : SDC Publications, [2020] 2020

Principles of computer-aided design

Ipswich, Massachusetts : Salem Press, a division of EBSCO Information Services, Inc. ; Amenia, NY : Grey House Publishing, [2022] 2022

Product design modeling using CAD/CAE : the computer aided engineering design series

Chang, Kuang-Hua, 1960- author.
Kidlington, Oxford, UK : Academic Press, 2014. 2014

Qualitative models for space system engineering final report

Forbus, Kenneth D.
[Washington, D.C. : National Aeronautics and Space Administration, 1990] 1990

Rapid prototyping of biomaterials : principles and applications

Oxford : Woodhead Publishing, 2014. 2014

Requirements for multidisciplinary design of aerospace vehicles on high performance computers

Voigt, Robert G.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1989] 1989

Simulations with NX : Kinematics, FEA, CFD, EM and data management. With numerous examples of NX 9

Munich : Hanser, 2015. 2014