Welcome to the Kids' Library!

Advanced high temperature structural seals

[Cleveland, Ohio] : National Aeronautics and Space Administration, Glenn Research Center ; [Springfield, Va. : For sale by the National Technical Information Service, 2002] 2002

An aerodynamic analysis computer program and design notes for low speed wing flap systems

Carlson, Harry W.
[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1983. 1983

Aerodynamic design and computational analysis of a spacecraft cabin ventilation fan

Tweedt, Daniel L. (Daniel Lawrence)
Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, [2010] 2010

Aeroelastic sizing for high-speed research (HSR) longitudinal control alternatives project (LCAP)

Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [2005] 2005

Application of decomposition techniques to the preliminary design of a transport aircraft

Rogan, J. E., author.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1987] 1987

Applications of fuzzy theories to multi-objective system optimization

Rao, S. S.
Moffett Field, Calif. : National Aeronautics and Space Administration, Ames Research Center ; [Springfield, Va. : For sale by the National Technical Information Service, 1991] 1991

Applying Monte Carlo simulation to launch vehicle design and requirements analysis

Hanson, J. M.
[Huntsville], Ala. : National Aeronautics and Space Administration, Marshall Space Flight Center, [2010] 2010

An Attached Payload Operations Center (APOC) at the Goddard Space Flight Center (GSFC)

Vienna, Virginia : Engineering and Economics Research, Inc. ; Greenbelt Maryland : National Aeronautics and Space Administration, Goddard Space Flight Center, 1983. 1983

AXAF X-ray calibration spectrometers

Cambridge, MA : Smithsonian Astrophysical Observatory ; Marshall Space Flight Center, AL : National Aeronautics and Space Administration, George C. Marshall Space Flight Center, [1992] 1992

BladeCAD: an interactive geometric design tool for turbomachinery blades

Miller, Perry L., author.
Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, July 1996. 1996-

Block II solid rocket motor (SRM) conceptual design study final report

Gainesville, Va. : Atlantic Research Corporation, Propulsion Division ; [Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1986- 1986

Cold-air investigation of first state of 4 1/2-stage, fan-drive turbine with average stage-loading f

Whitney, Warren J., author.
[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch, January 1981. 1981-

A computer module used to calculate the horizontal control surface size of a conceputal aircraft des

Sandlin, Doral R. (Doral Randolph), 1930-
San Luis Obispo, Calif. : California Polytechnic State University, Aeronautical Engineering Dept. ; [Washington, D.C.] : National Aeronautics and Space Administration ; [Springfield, Va. : National Technical Information Service, distributor, 1990] 1990

Conceptual design and analysis of roads and road construction machinery for initial lunar base opera

Banks, Joel.
Austin, Tex. : University of Texas at Austin, Mechanical Engineering Dept., [1990] 1990

Conceptual design optimization study

Hollowell, S. J.
[Washington, D.C.] : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; Springfield, Va. : For sale by the National Technical Information Service, 1990. 1990

Data quality analysis at the National Transonic Facility

Stewart, Pamela N.
Washington, D.C. : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, [1990] 1990

Design and analysis study of a spacecraft optical transceiver package final report

St. Louis, Mo. : McDonnell Douglas Astronautics Company, St. Louis Division ; [Pasadena, Calif.] : Jet Propulsion Laboratory, California Institute of Technology, [1985] 1985

Design considerations for lightweight space radiators based on fabrication and test experience with

Juhasz, Albert J.
Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center ; Hanover, MD : Available from NASA Center for Aerospace Information ; Springfield, VA : National Technical Information Service [distributor, 2002] 2002

Design, fabrication, and delivery of a miniature Cassegrainian concentrator solar array system final

Kruer, Mark A.
Redondo Beach, CA : Engineering and Test Division, TRW Space & Technology Group ; Huntsville, AL : Marshall Space Flight Center, National Aeronautics and Space Administration, [1987] 1987

Design of an autonomous lunar construction utility vehicle

[Norfolk, Va.] : NASA/USRA Advanced Design Program, Old Dominion University, [1990?] 1990

Design of sensors for control of closed loop life support systems

Gainesville, Fla. : University of Florida, [1990]. 1990

Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio w

McGehee, C. R., author.
Wichita, KS : The Boeign Co. ; Hampton. Virginia : National Aeronautics and Space Administration, Langley Research Center, [1986] 1986

Development and analysis of cold trap for use in fission surface power-primary test circuit

Wolfe, T. M., author.
Huntsville, Ala. : National Aeronautics and, Space Administration, Marshall Space Flight Center, [2012] 2012

Development of a shuttle plume radiation heating indicator final report

Reardon, John E.
Marshall Space Flight Center, Ala. : National Aeronautics and Space Administration, George C. Marshall Space Flight Center ; [Springfield, Va. : National Technical Information Service, distributor, 1988] 1990

Duct flow nonuniformities study for Space Shuttle main engine technical report

Thoenes, Jurgen.
Huntsville. AL : Lockheed, Missiles & Space Company. Inc, Huntsville Engineering Center ; National Aeronautics and Space Administration, Marshall Space Flight Center, [1985] 1985

Error propagation analysis in the SAE Architecture Analysis and Design Language (AADL) and the EDICT

LaValley, Brian.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [2011] 2011

Extended parametric representation of compressor fans and turbines

Converse, George L.
Cincinnati, Ohio : General Electric Company, Aircraft Engine Business Group, Advanced Technology Programs Dept. ; Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, [1984] 1984

Fastener design manual

Barrett, Richard T.
[Washington, D.C.] : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990. 1990

Flight motor set 360L001 (STS-26R) final report

George, Russell J.
Brigham City, UT : Thiokol Corp., Space Operations ; Marshall Space Flight Center, Ala. : National Aeronautics and Space Administration, George C. Marshall Space Flight Center, [1989] 1989

The full-scale process and design changes for elimination of insulation edge separations and voids i

Brigham City, UT : Thiokol Corp., Space Operations, [1991] 1991

Heat transfer to two-phase air/water mixtures flowing in small tubes with inlet disequilibrium

Janssen, J. . M., author.
[Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center, March 1986. 1986-

Interstellar medium absorption profile spectrograph (IMAPS) final project report

Jenkins, Edward B.
Princeton, N.J. : Princeton University Observatory ; Greenbelt, MD : Goddard Space Flight Center, National Aeronautics and Space Administration, [1985] 1985

Large-scale advanced prop-fan (LAP) blade design

Sullivan, William E.
[Windsor Locks, Conn.?] : Hamilton Standard Division, United Technologies ; [Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center, [1984?] 1984

Large-scale advanced prop-fan (LAP) ptich change actuator and control design report

Schwartz, Robert A.
[Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center, [1986] 1986

Launch vehicle design process characterization, technical integration, and lessons learned

Marshall Space Flight Center, Ala. : National Aeronautics and Space Administration, George C. Marshall Space Flight Center ; Hanover, MD : Available from NASA Center for AeroSpace Information, [2001] 2001

Modeling and analysis of mixed synchronous/asynchronous systems

Driscoll, Kevin R., author.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [2012] 2012

Modifications to the 4 x 7 meter tunnel for acoustic research engineering feasibility study.

Orlando, Fla. : DSMA Engineering Corporation; Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1986] 1986

Multifidelity analysis and optimization for supersonic design

Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center , [2010] 2010

National combustion code parallel performance enhancements

Quealy, Angela.
[Cleveland, Ohio : NASA Glenn Research Center, 2002] 2002

NDARC NASA Design and Analysis of Rotorcraft

Johnson, Wayne, 1946-
Moffett Field, Calif. : National Aeronautics and Space Administration, Ames Research Center, [2009] 2009

Onsite 40-kilowatt fuel cell power plant manufacturing and field test program

South Windsor, Conn. : United Technologies Power Systems ; Washington, D.C. : U.S. Dept. of Energy, Fossil Energy, Office of Coal Utilization and Extraction, [1985] 1985

An optimization-based integrated controls-structures design methodology for flexible space structure

Maghami, Peiman G.
[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Progam, 1993. 1993

Optimization of a magnet circuit design for a cylindrical mass spectrometer

Waltham, Mass. : Raytheon Company Microwave and Power Tube Division ; [College Park, Md. : University of Maryland Institute of Physical Science Technology ; [Washington, DC : National Aeronautics and Space Administration, 1983] 1983

Preliminary design and analysis of the GIFTS instrument pointing system

Zomkowski, Paul P.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [2003] 2003

Preliminary design of a supersonic cruise aircraft high-pressure turbine final report

Aceto, L. D.
[Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, 1983] 1983

Report on the formal specification and partial verification of the VIPER microprocessor

Brock, Bishop.
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; Austin, Texas : Computational Logic, Inc., [1991] 1991

Research on a two-dimensional inlet for a supersonic V/STOL propulsion system

Mark, J. L.
St. Louis, Mo.] : McDonnell Aircraft Company, McDonnell Douglas Corporation ; [Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center, [1989] 1989

Research on output feedback control interm report, January 1985 - September 1985

Calise, Anthony J.
Philadelphia, PA : Mechanical Engineering and Mechanics, Drexel University ; Hampton, Va. : NASA-Langley Research Center, [1985] 1985

SEE design guide and requirements for electrical deadfacing

Berki, J. M.
MSFC, AL : National Aeronautics and Space Administration, Marshall Space Flight Center ; [Springfield, Va. : For sale by the National Technical Information Service, 2002] 2002

Servicer system demonstration plan and capability development final technical report

Denver, Colo. : Martin Marietta Denver Aerospace ; [Washington, D.C. : National Aeronautics and Space Administration, 1985] 1985